Pool
Your drinking water, well or surface may not be good enough for swimming. The tap water often has high levels of minerals and a low pH, two factors that can damage your pool and prevent the effectineness of the chemical treatment . Well water and a surface source, in addition to contain salts, usually carries suspended solids, turbidity generators.
The two most important factors for maintaining healthy pool water are: it must be sanitized and balanced. The best way to sanitize your pool is with chlorine. Keeping your pool balanced, which means that basic water levels are within the normal range, makes the sanitizer act more effectively. Therefore, to achieve a healthy pool, sanitize and balance are equally important.
In Aguasin we count with professionals dedicated to delivering the best solutions. Contact Us and we will answer your request.
Algaecides
Algaecides sometimes, independent of how well you take care of your pool, algae can appear. The best way to prevent them is to use an algaecide as part of the routine maintenance of your swimming pool. The algae are microscopic plants that fall into the pool through the rain, the wind and reproduce quickly in the water, leaving it without possibility of use. The most common is the green algae, which can turn the pool green in hours, and can be found in all kinds of swimming pool.
If your pool is already algae infected, take action immediately. Different algae may be more resistant and require different treatment. Always add the algicide directly into the water of the pool. The day after treatment, brush walls and aspire. If you have had algae, use the algicide in a preventive manner.
To prevent and eliminate we have the following products:
Types
| Alga Kill | Product that allows for the prevention and elimination of algae, also conducting a clarification of the water. Weekly Application. |
| Algaecide | Product that allows the control of algae in swimming pools and that should be used in conjunction with chlorine and other additives that are used in the normal maintenance of the water in your pool. Weekly Application. |
| Alga Free | Concentrated product that should be used in conjunction with chlorine and allows that algae are not formed if chlorine levels decrease under the recommended level. |
| Algaecides Pools Assembled | For swimming pools being assembled product that prevents and eliminate algae, making water clarification. Weekly Application. |
Balancers
Types
| Balance | When the water in your pool is "balanced", has the PH and alkalinity in their correct levels. Maintaining the correct levels is essential, because it allows the products to function properly, especially chlorinated products, that sanitize the swimming pool. A proper balance of your pool allows you to prevent deterioration of the surface of the pool, corrosion, and stains in the swimming pool, eye and skin irritant, and turbidity of the water. |
| Alkalinity Total | The total alkalinity of pool is the measure of the total amount of alkaline material that is dissolved in the water. These materials are carbonates, bicarbonates and hydroxides. Being different to pH, total alkalinity helps to stabilize the pH. If the alkalinity is very low, the pH level will be very sensitive and could suffer major changes. When the level of alkalinity is high, apart from contributing to maintain the murky water, keeps the pH level very high. To raise the alkalinity of your pool apply STABILIZER OF ALKALINITY, to lower apply LOW PH. |
| PH | PH is a value that indicates the level of acidity or basicity of the pool water, the concentration of hydrogen ion in the water. A greater concentration of the hydrogen ion, the lower the pH. The pH is one of the values to control more important in the water in your pool. You must maintain a pH level between 7.2 and 7.6 and must be measured 2 times per week. If the pH of the pool is less than 7.2 you must add RAISES PH, on the contrary, if the pH is above 7.6 you must use LOW PH. |
Clarifiers
Any of the following products can be used to keep the water from the crystal clear swimming pool.
Types
| Clear Shock | It is a product that eliminates odors by excess of organic matter, reduces the smell of chlorine that generate the chloramines and gives a marked improvement in the clarity of the water. Chloramines are formed with organic waste, which contain nitrogen, such as sunscreens, cosmetics, perspiration and other. The result of the chloramines is that do not allow the function of the chlorine sanitizer, producing chlorine odor, turbid waters and irritation of the eyes. The chloramines need to be destroyed (oxidized) for which there is residual chlorine in the pool. The residual chlorine, or chlorine free is the one that eliminates bacteria and algae. Using CLEAR SHOCK in your pool regularly, you are sure to have high levels of free chlorine in your pool, giving it a proper hygiene, keeping it protected from bacteria and algae. |
| Shiny Pool | Product being assembled for swimming pools that purifies, clarifies and eliminates odors of the water in your pool. Eliminates waste water pollutants (chloramines) derived from the chlorine that are toxic and cause irritation to the skin and eyes. Using SHINY POOL, improves the effectiveness of the chlorine, while maintaining the pool protected from bacteria and algae. Weekly use. |
| Clarificador | It is a product to remove thin material in suspension, which are permanent cause of turbidity of the water and many times impossible to delete only with the filtering process. The application of this product allows a greater efficiency of the filter and therefore a water crystal clear and much more enjoyable for children. Weekly use. |
| Aqua Clear | For swimming pools being assembled product that eliminates particles in suspension, clarifying the water of the pool. Weekly use. |
| Clear Flock | Product that performs functions of clarification, eliminating the turbidity of the water caused by the presence of particles in suspension. |
| Decanter and Decanter Plus | Products to remove turbidity of water caused by the presence of particles in suspension, acting on any material that accumulates in the water from the environment. Acts sedimenting particles to the bottom of the pool, to aspire. |
| Clarifiers |
• Clarifies and coagulates suspended impurities in the water in your pool, favoring the quality of filtration and clarifying the water. • Creates a layer on the sands that retains particles. • Dosage: 1 sachet each 50m3 two times a month. |
Chlorinated Products
Types
| Stabilized | |
|---|---|
| Granulated Chlorine Product | That is applied directly in the water and is rapidly dissolved. |
| Chlorine Tablets | Chlorine of slow dissolution for control of microorganisms in the water in your pool. Tablets of 200gr. Applies in the skimmer or floater. |
| Triple Action Chlorine Tablet | 3 In 1 product that performs functions of chlorination, algaecide and clarification. |
| Floater Tabs | Chlorine tablets of 20g in dispenser for swimming pools being assembled. |
| Chlorine tablets 20 G | Slowly dissolving chlorine tablets for swimming pools being assembled. Applies in floater. |
| 4 Effects |
• Performs the function of chlorination, algaecide, clarification and maintains the swimming pool without tartar. • Applies directly to the water. • Dosage: 30 g each 10m3 daily. |
| 5 Effects |
• Performs the function of chlorination, algaecide, clarification, maintains the swimming pool with a pH stabilized and without tartar. • Applies in the skimmer or floater. • Dose: 1 tablet every 25m3 lasts approx. 6 To 7 days. |
| Summer |
• Meter that performs the function of chlorination, algaecide, clarification, maintains the swimming pool with a pH stabilized and destroys the organic matter. • Dosage: 1 Meter each 50m3 lasts approx. 5 To 7 weeks. |
| Non Stabilized | |
|---|---|
| Liquid Chlorine | Product that is applied in the water and quickly raises the level of chlorine in your pool, but that not being stabilized is shorter than in the water because that is not protected against the sun's rays. Its implementation is daily. |
Non Chlorine Products
New line of products to mantain pools without using chlorine.
o BIO FREE CLOR 1 L / BIO FREE CLOR ASSEMBLED POOLS 1 L
BIO FREE CLOR is a product to protect the water in your swimming pool against the action of bacteria, viruses, fungi, and algae. THIS PRODUCT IS FREE OF CHLORINE. One of its main advantages, compared to the chlorine, is that it preserves the crystal clear water for a long period of time with only a monthly application (structural pools) and weekly applications (swimming assembled pools) which facilitates the care and avoids the oversights associated with the chlorine to not make a timely application.
BIO ALGICIDE 1 L
BIO algaecide is a reinforcement algaecide to implement in pools prone to algae, that use BIO FREE CLOR. Product that does not generate foam and clarifies the water.
BIO SHOCK 1 KG
BIO SHOCK purifies and clarifies the water in swimming pools that use Bio Free Clor. Oxidant product, which eliminates waste pollutants, oils, suntan lotion and other organic compounds of similar nature, which generated turbidity and bad smell in the pools. Applies in conjunction with BIO algaecide to kill the algae in the pool.
AQUACHEK ANALYZER
ANALYZER AQUACHEK analyzer is a very easy to use and easy to measure in seconds, via strips of analysis, the levels of Bio Free Clor, pH and alkalinity of the water of the pool.
Special Products
Aguasin counts with special products that allow you to keep your pool water clear.
| Anti-tartar | Product to prevent and control the formation of stains on the walls of the pool, caused by sediments of different nature, such as lime salts and iron dissolved, avoiding the turbidity that is generated in the water, and cannot be deleted by the normal process of filtration. |
| Carenit Pool | Siliceous sand filters. Maintaining good quality sand in your filter, your pool will remain more clean. The sand filter has a duration approx. For 2 years. |
| Carenit Filter Plus | Natural material of high efficiency filter that allows you to remove particles as small as 0.3 microns and reduces the chloramines that generate bad odor and irritation in the eyes and skin. Due to its high load filter allows you to reduce the number of retro washes with a significant savings of water and electricity. The filter with this material is achieved greater clarification of the water versus other filter materials. |
About Us
Aguas Industriales Ltda is a belonging Enterprise to the INPROSA group. It was founded in 1961 by Wilhelm Niehaus Stubbe. Since its beginning, Aguasin has been known for being a organization... (See more)
