Filters
The Aguasin filters constitute our standard line. These are mixed with other teams to form the overall design of a treatment plant. Its operation is manual or automatic and its construction is in steel and reinforced fiber alternately for some smaller sizes.
There are filters made to protect equipment, rather than clarify water. In this case, the filter elements are removable (or tights cartridges) for replacement or for submission to external cleaning.
• Pressure filters made by Aguasin are the most common and they conform a multilayer filter descending from the largest to smallest size.
• Flocculators filters are equivalent to those above, but for being cilindrically taller and operate at a lower rate, flocculation allows particles
before reaching the filter beds.
• Pool filters have only one filter bed and operate at higher rates, because the flow of water treated to several times through the filter in a
recirculation stream from the filter to the pond (or pool).
• The activated carbon filter which has a specific surface loading of from 1,000 to 1,200 m2/gr, for which gives a capacity of organic pollutants and
covalent decomposition (decomposition of active chlorine in chlorides Cl2 = 2Cl-).
• The filters remove iron and manganese have a load of green sand or glauconite, which has a surface activated with an oxidizer (KMnO4) which allows contaminants from
water to oxidize and absorb or trap in the same bed.
• The screen filters are devices that trap particles from the water, which outweigh the aperture size of the mesh specified. It is important to consider the number of
particles larger than the mesh, so as to define the required area or the flow rate that can treat a specific model.
In Aguasin we count with professionals dedicated to delivering the best solutions. Contact Us and we will answer your request.
Carbón Activated
AGUASIN activated carbon filters, CMA (manual with steel body), CAA (automatic with steel body) and CAF (automatic with fiber body) series, work under pressure and are able to eliminate the chlorine and organic compounds in water by passing this through a bed activated carbon, obtaining clean water, odorless and tasteless.
Cartridges Filters
Purtrex depth filter has an exceptional value for general applications where durability is required, high purity and low frequency of change.
Produced through GE Water & Process Technologies patented fusion technology blown microfiber Purtrex is 100% pure polypropylene for depth filter with exceptional holding capacity.
Purtrex not contain humectants, solvents, antistatic agents, and meets FDA requirements for contact with food and drinks.
Typical Applications
• Drinking water filtration.• Chemical filtration.
• Bathrooms.
• Filtration Anime.
• Meets quality standards of the FDA for food and beverages.
General Properties
Purtrex Filters are available in the following nominal pore sizes: 1, 3, 5, 10, 20, 30, 50 and 75 microns.
Mesh Filters
Filtomat filtration equipment were developed in Israel in 1976. They are mesh filters and take advantage due to its high cleaning efficiency and simplicity of operation.
Not require electrical power and taking advantage of the feed water pressure. Filtomat mesh filters are installed directly into the water line.
The water enters a large initial screening or grinding, to prevent entry of larger particles to the system. From there, the water enters the fine filter chamber,
one micron preset.
The particles accumulate in the fine mesh, producing a differential pressure between input and output, which gives rise to the automatic cleaning.
The teams below 50 micron mesh required minimum pressure, higher than the other meshes, so please refer case to case.
Filtomat has exclusively MCFM model, considered the whole event.
Pool Filters
Pool filters AGUASIN PM model, work under pressure, manually operated and designed to clarify water recirculation circuits, such as swimming pools, cooling towers, decorative fountains, etc.
They are built on steel plates dished cold, epoxy coated inside with high resistance to corrosion. They have different loads of support and particle size filtering selected. On the front have a manifold of command for operations of filtration, washing and backwashing.
Flocculators
AGUASIN flocculators filters, and flaA FLMA series of manual and automatic operation, respectively, work under pressure and make clear water to a turbidity of less than 2 NTU. This is done because the computer is equipped with loads of different supportive and filter fineness.
The water passes through the layers in a downward direction, thus generating a process of coagulation-flocculation of colloids, as a result of progressive increase in water velocity, resulting in the disruption of electrochemical equilibrium of these colloids. This selective filtration process, allows for removal of particles at least five times more efficient than conventional filters of quartz.
Manual and Automatic Filters
Water softener by ionic interchange are generally used as equipment that set up the water of low pressure boilers, heating systems, or where the water supply has got special content of calcium and magnesium which has to be removed.
Aguasin has got a standard line of these equipment (Manual and Automatic versions), and also equipment built in steel or reinforced fibre.
Additionally to the traditional softeners (co-current, manual or automatic) there are designs that permit the optimization of the softening process. In this case the design of the softener is made counter-current, fixed-layer, etc.; which also operate in manual or automatic forms. For this design, the equipment are calculated depending on the application and quality of the water that it is needed to be reached, from the available customer quality.
• Pool Datasheet
• Technical Datasheet ABAA-ABMA, ABAF
• Technical Datasheet CAA-CMA, CAF
• Technical Datasheet FLAA-FLMA
• Technical Datasheet QAA-QMA-QAF
Multimedia in Pressure.
AGUASIN depth filters, QMA (manual steel body), QAA (automatic steel body ) and QAF (automatic with fiber body) series, work under pressure and make clear water to a turbidity of less than 2 NTU (*). This is done because they are equipped with lift and grain material selected, and inside you have a perfect distribution of water through nozzles or distributor vertebrate.
Iron and Manganese Reducers
The AGUASIN reducers filters for iron and manganese, ABMA (manual), ABAA (automatic) and ABAF (automated fiber) series, have different loads of support and filtering. Stresses the Greensand, which gives the instrument the particularity of removing iron and manganese from water, the inside is distributed through vertebrates distributors or nozzles.
About Us
Aguas Industriales Ltda is a belonging Enterprise to the INPROSA group. It was founded in 1961 by Wilhelm Niehaus Stubbe. Since its beginning, Aguasin has been known for being a organization... (See more)
